You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

174 lines
8.1 KiB

4 years ago
## wget
### Objectives
4 years ago
This project objective consists on recreating some functionalities of [`wget`](https://www.gnu.org/software/wget/manual/wget.html) using **Go**.
4 years ago
4 years ago
These functionalities will consist in:
4 years ago
4 years ago
- The normal usage of `wget`: downloading a file given an URL, example: `wget https://some_url.ogr/file.zip`
4 years ago
- Downloading a single file and saving it under a different name
- Downloading and saving the file in a specific directory
- Set the download speed, limiting the rate speed of a download
4 years ago
- Continuing interrupted downloads
4 years ago
- Downloading a file in background
4 years ago
- Downloading multiple files at the same time, by reading a file containing multiple download links asynchronously
4 years ago
- Main feature will be to download an entire website, [mirroring a website](https://en.wikipedia.org/wiki/Mirror_site)
4 years ago
### Introduction
Wget is a free utility for non-interactive download of files from the Web. It supports HTTP, HTTPS, and FTP protocols, as well as retrieval through HTTP proxies.
4 years ago
To see more about wget you can visit the manual by using the command `man wget`, or you can visit the website [here](https://www.gnu.org/software/wget/manual/wget.html).
4 years ago
#### Usage
4 years ago
Your program must have as arguments the link from where you want to download the file, for instance:
4 years ago
```console
student@student$ ./wget https://pbs.twimg.com/media/EMtmPFLWkAA8CIS.jpg
```
The program should be able to give feedback, displaying the:
4 years ago
- Time that the program started: it must have the following format **yyyy-mm-dd hh:mm:ss**
- Status of the request. For the program to proceed to the download, it must present a response to the request as status OK (`200 OK`) if not, it should say which status it got and finish the operation with an error warning
- Size of the content downloaded: the content length can be presented as raw (bytes) and rounded to Mb or Gb depending on the size of the file downloaded
4 years ago
- Name and path of the file that is about to be saved
- A progress bar, having the following:
4 years ago
- A amount of `KiB` or `MiB` (depending on the download size) that was downloaded
4 years ago
- A percentage of how much was downloaded
- Time that remains to finish the download
4 years ago
- Time that the download finished respecting the previous format
4 years ago
It should look something like this
```console
student@student$ go run main.go https://pbs.twimg.com/media/EMtmPFLWkAA8CIS.jpg
start at 2017-10-14 03:46:06
sending request, awaiting response... status 200 OK
content size: 56370 [~0.06MB]
saving file to: ./EMtmPFLWkAA8CIS.jpg
55.05 KiB / 55.05 KiB [================================================================================================================] 100.00% 1.24 MiB/s 0s
Downloaded [https://pbs.twimg.com/media/EMtmPFLWkAA8CIS.jpg]
finished at 2017-10-14 03:46:07
```
#### Flags
Your program should be able to handle different flags.
1. Download a file and save it under a different name by using the flag `-O` followed by the name you wish to save the file, example:
```console
student@student$ go run main.go -O=meme.jpg https://pbs.twimg.com/media/EMtmPFLWkAA8CIS.jpg
start at 2017-10-14 03:46:06
sending request, awaiting response... status 200 OK
content size: 56370 [~0.06MB]
saving file to: ./meme.jpg
55.05 KiB / 55.05 KiB [================================================================================================================] 100.00% 1.24 MiB/s 0s
Downloaded [https://pbs.twimg.com/media/EMtmPFLWkAA8CIS.jpg]
finished at 2017-10-14 03:46:07
student@student$ ls -l
-rw-r--r-- 1 student student 56370 ago 13 16:59 meme.jpg
-rw-r--r-- 1 student student 11489 ago 13 10:28 main.go
```
---
4 years ago
2. It should also handle the path to where your file is going to be saved using the flag `-P` followed by the path to where you want to save the file, example:
4 years ago
```console
student@student$ go run main.go -P=~/Downloads/ -O=meme.jpg https://pbs.twimg.com/media/EMtmPFLWkAA8CIS.jpg
start at 2017-10-14 03:46:06
sending request, awaiting response... status 200 OK
content size: 56370 [~0.06MB]
saving file to: ~/Downloads/meme.jpg
55.05 KiB / 55.05 KiB [================================================================================================================] 100.00% 1.24 MiB/s 0s
Downloaded [https://pbs.twimg.com/media/EMtmPFLWkAA8CIS.jpg]
finished at 2017-10-14 03:46:07
student@student$ ls -l ~/Downloads/meme.jpg
-rw-r--r-- 1 student student 56370 ago 13 16:59 /home/student/Downloads/meme.jpg
```
---
4 years ago
3. The program should handle speed limit. Basically the program can control the speed of the download by using the flag `--rate-limit`. If you download a huge file you can limit the speed of your download, preventing the program from using the full possible bandwidth of your connection, example:
4 years ago
```console
student@student$ go run main.go --rate-limit=400k https://pbs.twimg.com/media/EMtmPFLWkAA8CIS.jpg
```
4 years ago
This flag should accept different value types, example: k and M. So you can put the rate limit as `rate-limit=200k` or `rate-limit=2M`
4 years ago
---
4 years ago
4. Downloading different files should be possible. For this the program will receive the `-i` flag followed by a file name that will contain all links that are to be downloaded. Example:
4 years ago
```console
student@student$ ls
download.txt main.go
student@student$ cat download.txt
http://ipv4.download.thinkbroadband.com/20MB.zip
http://ipv4.download.thinkbroadband.com/10MB.zip
student@student$ go run main -i=download.txt
content size: [10485760, 20971520]
finished 10MB.zip
finished 20MB.zip
Download finished: [http://ipv4.download.thinkbroadband.com/20MB.zip http://ipv4.download.thinkbroadband.com/10MB.zip]
```
The Downloads should work asynchronously, it should download both files at the same time. You are free to display what you want for this option.
---
4 years ago
5. [**Mirror a website**](https://en.wikipedia.org/wiki/Mirror_site). This option should download the entire website being possible to use "part" of the website offline and for other useful [reasons](https://www.quora.com/How-exactly-does-Mirror-Site-works-and-how-it-is-done). For this you will have to download the website file system and save it into a folder that will have the domain name. Example: `http://www.example.com`, will be stored in a folder with the name `www.example.com` containing every file from the mirrored website. The flag should be `--mirror`.
4 years ago
The default usage of the flag will be to retrieve and parse the HTML or CSS from the given URL. This way retrieving the files that the document refers through tags. The tags that will be used for this retrieval must be `a`, `link` and `img` that contains attributes `href` and `src`.
4 years ago
You will have to implement some optional flags to go along with the `--mirror` flag.
Those flags will work based on [Follow links](https://www.gnu.org/software/wget/manual/wget.html#Following-Links). The command `wget` has several mechanisms that allows you to fine-tune which links it will follow. For This project you will have to implement the behavior of (note that this flags will be used in conjunction with the `--mirror` flag):
- [Types of Files](https://www.gnu.org/software/wget/manual/wget.html#Types-of-Files) (`--reject` short hand `-R`)
> this flag will have a list of file suffixes that the program will avoid downloading during the retrieval
example:
```console
student@student$ ./wget --mirror -R=jpg,gif https://example.com
```
- [Directory-Based Limits](https://www.gnu.org/software/wget/manual/wget.html#Directory_002dBased-Limits) (`--exclude` short hand -X)
> this flag will have a list of paths that the program will avoid to follow and retrieve. So if the URL is `https://example.com` and the directories are `/js`, `/css` and `/assets` you can avoid any path by using `-X=/js,/assets`. The fs will now just have `/css`.
example:
```console
student@student ./wget --mirror -X=/assets,/css https://example.com
```
4 years ago
### Hint
You can take a look into the [html package](https://godoc.org/golang.org/x/net/html) for some help.\
Try the real flags from the wget command to better understand their usage.
4 years ago
---
This project will help you learn about:
- [GNU Wget](https://www.gnu.org/software/wget/manual/wget.html)
4 years ago
- HTTP
- [FTP](https://en.wikipedia.org/wiki/File_Transfer_Protocol)
- Algorithms (recursion)
4 years ago
- Mirror websites
- Follow links
- File system (fs)